D-Series Chamfering Range
 |
45° Chamfering Blades
These blades are used to chamfer holes from 1" to 4-3/8" in diameter.
When used in the same set up and holder which produced the hole,
close concentricity can be achieved. Please inquire
END MILL PRICELIST EFFECTIVE 9/1/24
|
45° Chamfering Blades
These blades are used to chamfer holes from 1" to 4-3/8" in diameter.
When used in the same set up and holder which produced the hole,
close concentricity can be achieved. Please inquire
